Tel: +357 2539600

CONCRETE REINFORCING STEEL

CONCRETE REINFORCING STEEL

Concrete Reinforcing Steel, grade B500C, of high strength and ductility, certified with the internationally recognized UK standard BS4449:2005. The iron strengthens the frame of a building and does not allow the concrete to fail and break the columns and beams thus enhancing the durability, strength and stability of the construction in the event of an earthquake.

The product is available in the following forms:

  • straight rods with side ribs, diameter of between Y8 until Y32mm and 12m length and 14m length
  • straight rods without side ribs (wire rod), diameter Φ6 to Φ8mm
  • in spooled coils with diameters ranging from 8mm to 16mm, as well as
  • at required length, upon request

TECHNICAL SPECIFICATIONS

Name Diameter
(mm)
Name Cross Section (mm2)Tolerance (%)Name Weight (kg/m)
850.3±60.395
1078.5±4,50.617
12113±4,50.888
14154±4,51.210
16201±4,51.580
18254±4,52.000
20314±4,52.470
22380±4,52.980
25491±4,53.850
28616±4,54.830
32804
±4,56.310
401257±4,59.860

MECHANICAL PROPERTIES (BS4449:2005)

SPECIFICATIONQUALITY B500C
Leakage Limit, F Y (MPA)≥500
Ratio of actual to nominal value of the leakage limit, FY, ACT/FY,NOM≤1,25
Ratio of tensile strength to leakage limit, FT/FY
≥1,15
≤1,35
Total distortion (elongation) at maximum load (%)≥7,5